❄️ 47.2″ Extendable Snow Brush & Ice Scraper — Reach Farther, Pack Smaller
❄️ 47.2″ Extendable Snow Brush & Ice Scraper — Reach Farther, Pack Smaller
BUNDLE & SAVE
Couldn't load pickup availability
-
Ordered
- - -
Order Ready
- - -
Delivered
❄️ 47.2″ Extendable Snow Brush & Ice Scraper — Reach Farther, Pack Smaller
Clear the car.
Keep moving.
Snow on the roof. Frost on the glass. Brush, flip and clear with one telescopic tool that reaches farther and packs down when you're done.
The middle of the windshield shouldn't be a stretch.
Extend the handle to bring more of the windshield and roof within reach. Ten length positions help you adjust it to the area you're clearing.
Let the brush adjust to the job.
Reposition the brush head to suit the surface and your stance. Keep a comfortable hold as you move between the windshield, roof and other snowy areas.
Set the angle and check that the head is secure before brushing.
Brush the snow. Flip for frost.
Keep the tool assembled while you work. Clear loose snow with the brush, then turn the whole tool around to use the scraper end on frosted glass.
- 1 Brush away loose surface snow.
- 2 Flip the tool and take a steady two-handed hold.
- 3 Work across the glass with controlled scraping strokes.
Give loose snow a gentle brush-off.
Dense, flexible bristles help sweep loose snow from your vehicle. The broad brush head brings more bristles to each pass.
Keep the bristles free of grit and use light, controlled strokes.
Start with a clearer view.
A thin layer of overnight frost can hide the road ahead. Use the scraper edge to work through that layer and uncover the glass beneath.
A practical part of your before-you-drive routine.
A softer place to hold on.
The cushioned EVA foam grip gives your hand a comfortable surface to hold while you brush and scrape. A small detail you'll appreciate on a cold morning.
More reach outside. Less bulk inside.
When the job is done, retract the shaft and separate the tool into three sections. Pack them together in a suitable storage bag for convenient carrying and trunk storage.
Keep your winter tool close by, without leaving a long assembled handle across the cargo area.
One useful addition to your winter kit.
Reach the awkward spots
Adjust the length and brush angle to suit the area you're clearing.
Switch jobs with a flip
Move from loose snow to windshield frost using the other end.
Pack it down afterward
Three sections make the tool easier to store and carry between uses.
The details, at a glance.
| Product type | Telescopic snow brush with ice and frost scraper |
|---|---|
| Adjustable length | 36.6–47.2 in / approx. 93–120 cm |
| Length settings | 10 positions |
| Brush head | Adjustable angle with dense, flexible bristles |
| Handle | Telescopic shaft with EVA foam grip |
| Color | Red and black with a silver shaft |
| Storage | Separates into 3 sections |
| Power source | Manual — no charging required |
| Tool parts | Brush head, telescopic handle and scraper end |
| Main uses | Brushing loose vehicle snow and scraping frost from glass |
Before the next cold morning.
Do I need to detach the scraper to use it?
No. For normal use, keep the tool assembled and turn it around to use the scraper end. Disassemble the three sections when you're ready to pack it away.
Can I use it on an SUV?
The handle extends to 47.2 inches to help reach across larger vehicles. The area you can reach depends on your vehicle's height and width and where you stand.
What is the difference between the two ends?
The bristles brush away loose snow. The scraper end works on frost and ice on glass. Keep the scraper on glass rather than painted bodywork.
How do I store it after use?
Remove snow and moisture, allow the tool to dry, retract the shaft and separate the three sections. Keep the parts together in a suitable bag or storage area.
Does the handle heat up?
No. This is a manual tool. The EVA foam provides a cushioned grip; it does not contain a heater or battery.
Have it in the car before you need it.
Extra reach for the snow. A scraper for the frost. A comfortable grip and a practical way to pack it all away.
{% if product != blank %} {% assign sb26_form_id = 'sb26-form-' | append: section.id %} {% form 'product', product, id: sb26_form_id, class: 'sb-form' %} {% if product.has_only_default_variant %}{{ product.selected_or_first_available_variant.price | money }}
{% else %} {% endif %} {{ form.errors | default_errors }} {% endform %} {% else %}Choose your option in the product's purchase section.
{% endif %}
